Hopkins Build ref: 335

£135,000+vat SOLD

General Information

Overview:

Originally built in 2011 for the HRT F1 team, the transporter will carry 3 GT cars on the top deck and a formula car in the rear workshop if required. Since 2015 the transporter has been used in GP2

Detailed Specs

Generator:         110kw 415v

Mast:                    11mtr projection.

Compressor:      Hydrovane.

Workshop:

Dimensions:                       Carrying capacity 1x Car max height 1150mm car length 4650 mm

Walls and ceiling:              finished in high gloss white, 3x double power sockets per side.

Lighting:                               Full length corner lighting on both sides

Floor:                                    Finish in 3mm black circular stud matting.

Access hatch:                     Size approx 700mm x 800mm opening on a single gas Strut between lower deck and top deck.

Bench tops:        Finished in 18mm phynolic non slip ply, covered in 3mm black circular stud matting with aluminium radiused edges.

Workshop/Car Area

Height on top deck 1370mm,

length 13300mm.

Top deck:

Height on top deck 1370mm, length 13300mm.

  • Management Office:

    Height:                                 2060mm

    Length:                 5,000mm approx (extended over wheel archs as required)

    Width:                                  2,400mm approx

    Seating:                                Black leather with storage below.

    Walls:                                    Grey suede or grey melamine.

    Ceiling:                 silver slotted or suede

    Floor:                                    Black fleck carpet

    Overhead units:               Full length on both side walls. colour black

    Tables:                                  Five fixed tables with access between.

    Power:                                 A double socket below every table, 2 double sockets in the front bulk head.

    Front Bulk head:               In the original position with 32” TV mounted.

    Air conditioning:               New installation on the front bulk head.

    Fridge:                                  To the left of the personnel door with a storage unit or worktop above.

    Windows:                            New bonded over fit windows to the same style as 255.

Additional power info

3x Power outlets at roof height for lighting, 2x lower power sockets for power.

1x external power input socket for mains 240volt hook up, 1x 10m extension cable for hook up. 1x 9way consumer unit for electrics.

Office:                                 HRT spec

The original office will be removed and replaced with new, the nearside wall will have

Seating the full length, the offside wall will have seating from the goose neck up to the door.

Height:                                 2060mm

Length:                 5,000mm approx (extended over wheel archs as required)

Width:                                  2,400mm approx

Seating:                                Black leather with storage below.

Walls:                                    Grey sued or grey melamine.

Ceiling:                 silver slotted or sued

Floor:                                    Black flec carpet

Overhead units:               Full length on both side walls. colour black

Tables:                                  Five fixed tables with access between.

Power:                                 A double socket below every table, 2 double sockets in the front bulk head.

Front Bulk head:               In the original position with 32” TV mounted.

Air conditioning:               New installation on the front bulk head.

Fridge:                                  To the left of the personnel door with a storage unit or worktop above.

Windows:                            New bonded over fit windows to the same style as 255.

337

337

Want to Trade-In Or Sell Your Used Transporter?

Contact us for an appraisal.

Get In Touch

+44 11 79 509294

Hopkins Motorsport Ltd
Sampson Business Park
Hallen
Bristol
BS10 7RS

Email

sales@hopkinsmotorsport.com

Send A Message

13 + 12 =